Where does it ship from?

From the nearest regional warehouse: El Monte California, Warrenville Illinois, Minworth United Kingdom, Cottbus Germany or Laverton North Australia, so there are no customs delays.

Manual Tire Changer, No Power Needed | 12-21" | LCTX 3rd Gen

Q: Do I need electricity or an air compressor?

No. The LCTX 3rd Gen is entirely manual. A 3-hole progressive leverage system multiplies your force, so nothing needs to be plugged in or connected to air.

Q: What tyre sizes can it handle?

12 to 21 inch rim diameter (30.5-53.3 cm), covering ATV and UTV wheels, compact cars, crossovers, SUVs, sedans and full-size pickups. Rims under 12 inch are not compatible.

EUR

Australia AUD $
Canada CAD $
Germany EUR €
Japan USD $
United Kingdom GBP £
United States USD $

LCTX 3rd Gen 3-in-1 manual tire changer with full accessory set on white background

EZ Tirechanger LCTX 3rd Gen 3-in-1 Manual Tire Changer – No Power, No Compressor, 12"–21" Wheels

€263,95

EZ Tirechanger LCTX 3rd Gen 3-in-1 Manual Tire Changer – No Power, No Compressor, 12"–21" Wheels

Change any tyre, anywhere — zero power, zero compressor. A fully manual 3-in-1 bead-breaker, demount and mount tool that fits in your boot and handles 12″–21″ wheels, including run-flats. Three-hole progressive leverage does the hard work, and the rim-friendly Duck Head keeps alloy and chrome wheels unmarked.

€263,95

★★★★★(500+ reviews)

✓12–21″ rimsFits most vehicles

✓100% manualNo power, no compressor

✓45% less effortProgressive leverage

✓14-piece kitEverything included

Special offerSave $100 · free shipping from your nearest regional warehouse

✓ In stock — ships from your local warehouse, no customs delays

🚚 Free shipping↺ 30-day returns🔒 Secure payment🛡 12-month warranty

Good to know: this is a fully manual tool. No electricity and no air compressor are required — the 3-hole progressive leverage system does the work.

Video tutorials

Watch it work

Step-by-step introduction and full installation walkthrough.

Introduction

1. What the 3-in-1 tool does
2. Why no power or compressor is needed
3. Where it fits in your boot

Installation & user guide

1. Assembly of shovel and duck head
2. Breaking the bead with progressive leverage
3. Demounting and mounting the tyre

Why choose the 3rd Gen?

The LCTX 3rd Generation is a fully manual 3-in-1 bead-breaker, demount and mount station. It runs on nothing but leverage, so it works in a garage, on a track, at a trailhead or on the hard shoulder.

No power, no compressor — 100% manual progressive leverage
45% less effort — long-handle pivot design multiplies your force
Zero-damage duck head — rounded contact surfaces glide along the rim
No permanent bolting — stable base, set it down and work
Run-flat ready — leverage pull-rod handles stiff sidewalls
Packs down — 60 × 34 × 16 cm, fits in a car boot

Technical specifications

Model	YB1978
Power source	100% manual progressive leverage
Rim diameter range	12″–21″ (30.5–53.3 cm)
Rim types	Steel and alloy
Bead-break method	3-to-5-hole progressive leverage protocol
Assembled size	W 56 cm × L 47 cm × H 62 cm
Packed size	60 × 34 × 16 cm
Packed weight	26.3 kg
Installation	No permanent bolting required
HS code	8205900090
Warranty	12 months

Do I need electricity or an air compressor?

No. The 3rd Gen is entirely manual. A 3-hole progressive leverage system multiplies your force, so nothing needs to be plugged in or connected to air.

What tyre sizes can it handle?

12″ to 21″ rim diameter (30.5–53.3 cm), covering ATV/UTV wheels, compact cars, crossovers, SUVs, sedans and full-size pickups. Rims under 12″ — small utility, golf cart, lawn mower and some youth ATV tyres — are not compatible.

Will it damage my alloy wheels?

The Duck Head and bead-breaker shovel use rounded, smooth contact surfaces that glide along the rim. The kit also includes an anti-abrasion protective mat for the floor and rim face.

Does it work with run-flat tyres?

Yes. The Run-Flat Leverage Pull-Rod and Quick-Release Safety Pin are included specifically for run-flats and high-stiffness sidewalls.

What is in the box?

Fourteen numbered components plus two bonus parts — see the full parts list below.

How long does shipping take?

Orders ship from the nearest regional warehouse — El Monte CA, Warrenville IL, Minworth UK, Cottbus DE or Laverton North AU — so there are no customs delays.

There had to be a better way than expensive tire replacement

Wide compatibility from ATV to full size pickup

Premium shovel and duck head protect your rims

Home garage, off-road adventure, track day and mobile tire service

What’s included

Fourteen numbered components plus two bonus parts.

1Duck Head AssemblyPrecision steel head for zero-damage demounting and mounting, with multi-tool connection hub

2Connection ArmAttaches to the centre support mast to hold the duck head or bead breaker

3Bead Breaker Shovel AssemblyHigh-torque pressing assembly with adjustable stop bolt to control kickback

4Pull-Rod Locking MechanismLocks the run-flat leverage pull-rod during high-tension bead breaking

5Leverage Fulcrum BlockMetal resting block that provides mechanical leverage for the tire iron

6Centering Cones (set of 2)Small and large cones to secure varying wheel hub centre sizes

7Center Support MastPrimary vertical column anchoring the arm, duck head and shovel

8Run-Flat Leverage Pull-RodProvides extreme pulling power for stiff run-flat tyres

9Main Power Lever BarHigh-torque driving handle for rotating the turntable assembly

10Tire Iron (Pry Bar)Heavy-duty bar for manipulating the bead over the duck head

11Rotation Turntable BaseBase platform with anti-rotation indexing pin to lock the hub in place

12Quick-Release Safety PinHigh-tensile steel pin securing the pull-rod under heavy load

13Hex WrenchFor fine-tuning structural bolts and setting radial clearances

14Crescent WrenchFor torquing the main centre hub nut

+Bead Depressor ClipBonus part — holds the bead in the drop-centre during mounting

+Anti-Abrasion Protective MatBonus part — high-density anti-slip mat for a zero-scratch workspace

Installation & usage guide

Step-by-step instructions, taken from the official user manual.

Before you start

Wear heavy-duty protective gloves and safety eyewear. This equipment applies high manual torque and is not for use by anyone under 18.

Unbox the unit and lay the protective floor mat on a clean, level surface.
Organise all components against the parts list before assembling.
Inspect all structural hardware and fasteners and confirm they are tight.
Use only attachments rated for your tyre profile and rim dimensions.

Assembly — phases 1 to 3

Bead breaker shovel: slide the pull-rod locking mechanism onto the main tubular arm and secure with the retaining washers and locking bolts.
Slide the shovel pivot collar onto the end of the arm, flush with the through-holes. The collar is asymmetrical — the wider profile must face inboard, the narrower profile outboard.
Duck head: slide the leverage fulcrum block onto the square mounting stem of the duck head assembly, insert it into the multi-tool connection hub, then fit the flat washer and torque the securing bolt until rigid.
Mast and turntable: insert the connection arm through the recessed face of the rotation turntable base, align it with the connection hub and hand-tighten.
Check the turntable rotates freely and smoothly, then torque the locking nuts with the hex wrench.

A — breaking the bead

Insert the connection arm into the centre support mast and lower the fully deflated wheel over it until the hub sits flat.
Select the centring cone that matches your rim’s centre bore, slide it on, then torque the locking nut with the crescent wrench.
Insert the run-flat leverage pull-rod downwards through the rim, mount the bead breaker shovel and tighten its locking nut.
Insert the main power lever bar into the first (top) hole, secure it with the hex wrench and apply downward force.
To increase depth, loosen the adjustable stop bolt, move the bar to hole 2, then hole 3, retighten and press until the bead separates.
Flip the wheel over and repeat for the bottom bead.

Keep a firm two-handed grip on the lever bar at all times to manage mechanical torque.

B — removing the tyre from the rim

Invert the wheel face-up, install the rotation turntable base and mount the duck head on the centre support mast.
Work the duck head into the gap between the tyre bead and the rim flange, holding 5–8 mm axial clearance above the rim.
Apply mounting lubricant or strong soapy water where the duck head meets the bead. Align the duck head with the valve stem to protect TPMS sensors.
Stand on the tyre, or fit the bead depressor clip opposite the duck head, to push the bead into the drop-centre.
Pry the upper bead over the duck head knuckle with the tire iron, then rotate the turntable clockwise with the lever bar until the bead is free.
Lift the tyre, insert the tire iron about 5 cm under the lower bead and repeat, then rotate once more to release the tyre.

C — mounting a tyre

Apply mounting paste generously to both beads and place the tyre on the rim at an angle.
Position the duck head 180° opposite the valve stem so the bead has room to stretch into the drop-centre.
Place the lower bead over the tail of the duck head, hold the tyre at roughly 40°, and rotate the turntable clockwise.
Position the upper bead over the duck head, press down on the opposite side to keep it in the drop-centre, and rotate until fully seated.
Loosen the duck head slide with the hex wrench, release the centre locking nut with the crescent wrench, and lift the finished wheel off.

Keep hands clear of the pinch zone whenever the lever bar is under load.